HI-PERFORMANCE SUPER BN - EXTENDED THROTTLE SHAFT WITHOUT CHOKE SHAFT

38mm Mikuni #BN38-34-8113

53-2050/$166.05

44MM Mikuni #BN44-40-8067

53-2060S/$178.35

44MM Mikuni #BN44-40-8052

53-2060/$178.35

46MM Mikuni #BN46-42-8002

53-2065/$258.30

38MM FOR DUAL FRONT CARB Mikuni #BN38-34-8075

53-2074/$CALL

OEM REPLACEMENT SUPER BN - REGULAR THROTTLE SHAFT WITH CHOKE SHAFT - DIRECT REPLACEMENT FOR OEM CARBS AT A FRACTION OF OEM COST.

MAG-SIDE (FRONT) MIKUNI #BN401-38-26 - 40mm - I-SERIES - SEA DOO 720 GTI, GTS, GS, GSI 98, 800 GTS, GSX 96-00, 800 SPX 97-99, 800 XP 95-99, 951 GSX LTD 97

53-2085/$204.18

PTO-SIDE (REAR) MIKUNI #BN401-38-27 - 40mm - I-SERIES - SEA DOO 720 GTI, GTS, GS, GSI 98, 800 GTS, GSX 96-00, 800 SPX 97-99, 800 XP 95-99, 951 GSX LTD 97

53-2090/$204.18

44mm - I-SERIES - SEA DOO 720, GTI, GTS, GS, GSI 97 - MIKUNI #BN401-38-24

53-2080/$204.18

38mm - YAMAHA, WAVE RUNNER 500 88-89, WAVE JAMMER 500 88-89 - MIKUNI #BN34-28-8010

53-2063/$166.05

44mm - YAMAHA SUPERJET, WAVE BLASTER, TIGERSHARK - MIKUNI #BN44-40-43

53-2062/$178.35

44mm - I SERIES - SEA DOO 720, XP 95 PTO - MIKUNI #BN401-38-11

53-2072/$CALL

DUAL CARB SET 46mm - I SERIES - SEA DOO 951, GSX, GTX, XP-LTD 98-01, XP 00, RX, LRV - MIKUNI #BN461-42-B4

53-2095/$455.10

POP-OFF GAUGE - FOR ACCURATE ADJUSTMENT OF POP OFF PRESSURE LEVELS

MIKUNI GAUGE - 30 LBS.

53-9996/$44.46

53-9996-60/$44.46

MIKUNI GAUGE - 100 LBS.

53-9996-100/$44.46

AFTERMARKET THUMB OPERATED GAUGE

53-9995/$41.21

MIKUNI POCKET TUNER - A HANDY POCKET-SIZE SLIDE CALCULATOR WHICH CAN BE USED TO DETERMINE REQUIRED JETTING CHANGES IN MIKUNI CARBS DUE TO AMBIENT TEMPERATURE, ALTITUDE OR BOTH.

53-9988/4.07

MIKUNI TOOL KIT - THIS HANDY LITTLE KIT CONTAINS ALL THE TOOLS NECESSARY TO MAKE JETTING CHANGE, PERFORM NORMAL MAINTENANCE AS WELL AS DISASSEMBLE AND REBUILD ANY MIKUNI CARB.

53-9989/$18.88

SUPER BN CARBURETOR TUNING MANUAL

53-9999/$3.22

59-9131/$14.76

THROTTLE VALVE KIT FOR 44mm

MK-BN/044 TV/$24.60

THROTTLE VALVE KIT FOR 46mm

MK-BN/046 TV/$24.60

THROTTLE VALVE KIT FOR 47mm

MK-BN/038 TV/$24.60

90 DEGREE INLET FITTING (PRESS IN) - DIAGRAM #44

DF44-2/70/$3.86

ADJUSTER WITH CROSS BAR - HIGH SPEED 38/44 - DIAGRAM #24

BN44/167/$4.45

ADJUSTER WITH CROSS BAR - LOW SPEED 38 - DIAGRAM #29a

BN38/477/$4.74

ADJUSTER WITH CROSS BAR - LOW SPEED 44 - DIAGRAM #29b

BN38/166/$7.38

DIAPHRAGM ASSEMBLY - DIAGRAM #16

BN44/145/$10.44

SUPER BN FILTER - DIAGRAM #7

BN44/146/$3.66

ULTIMATE CARB GASKETS - THICK GREEN GASKETS

38mm

9230/$2.82

40mm "I" SERIES

9235/$2.82

44mm

9240/$2.82

46mm

9250/$2.82

48mm

9252/$2.82

50mm

9257/$2.82

48mm SD 951 I SERIES

6740/$2.53

ADJUSTER WITH CROSS BAR - ALLOW SIMPLE HI-SPEED ADJUSTMENTS WHICH IS NOT POSSIBLE WITH OEM SCREW.

HIGH SPEED CROSS BAR SCREW - "I" SERIES 44/46 MIKUNI, YAMAHA GP800/SEA DOO 951

SA-100/$11.17

LOW SPEED CROSS BAR SCREW - MIKUNI CARB, YAMAHA XL 1200LTD, XLT1200,GP1200R

SA-200/$11.17

HIGH SPEED CROSS BAR SCREW - MIKUNI CARB, YAMAHA XL 1200LTD, XLT1200,GP1200R

SA-300/$11.17

LOW SPEED CROSS BAR SCREW - OEM MIKUNI CARB, KAWASAKI 800SXR

SA-500/$11.17

HIGH SPEED CROSS BAR SCREW - OEM MIKUNI CARB, KAWASAKI 800SXR

SA-100/$11.17

LOW SPEED CROSS BAR SCREW -OEM YAM CARB, SUPERJET 2004+(CHOKE MUST BE REMOVED TO INSTALL)

SA-700/$11.17

HIGH SPEED CROSS BAR SCREW - OEM YAM CARB, SUPERJET 2004+(CHOKE MUST BE REMOVED TO INSTALL)

SA-800/$11.17

OLD TYPE NEEDLES & SEATS ROUND DIAPHRAGM COVER STANDARD BN / OLD TYPE, STANDARD METAL TIP

1.5 - MIKUNI #VM26/26-1.5

53-2500/$12.09

2.0 - MIKUNI #VM26/26-2.0

53-2501/$12.09

2.3 - MIKUNI #VM26/26-2.3

53-2502/$12.09

2.5 - MIKUNI #VM26/26-2.5

53-2503/$12.09

2.8 - MIKUNI #VM26/26-2.8

53-2504/$12.09

NEW TYPE NEEDLES & SEATS SQUARE DIAPHRAGM COVER SUPER BN (NEW TYPE) VITON TIP

1.2

1.5 - MIKUNI #786-35015-1.5

53-2600/$13.19

1.8 - MIKUNI #786-35015-1.8

53-2608/$13.19

2.0 - MIKUNI #786-35015-2.0

53-2601/$13.19

2.3 - MIKUNI #786-35015-2.3

53-2602/$13.19

2.5 - MIKUNI #786-35015-2.5

53-2603/$13.19

STANDARD METAL TIP

1.2 - MIKUNI #786-35018-1.2

53-2599/$13.19

1.5 - MIKUNI #786-35018-1.5

53-2598/$13.19

1.8 - MIKUNI #786-35018-1.8

53-2597/$13.19

2.0 - MIKUNI #786-35018-2.0

53-2596/$13.19

2.3 - MIKUNI #786-35018-2.3

53-2595/$13.19

2.5 - MIKUNI #786-35018-2.5

53-2594/$13.19

MIKUNI ARM SPRINGS

65gm - MIKUNI #730-03030

53-2614/$2.04

80gm - MIKUNI #730-03033

53-2613/$2.04

95gm - MIKUNI #730-03034 (THIS SPRING IS FOR SEA DOO BN 461 CARBS ONLY)

53-2615/$2.04

95gm - MIKUNI #730-03027-T

53-2612/$2.04

125gm - MIKUNI #730-03027

53-2611/$2.04

GENUINE MIKUNI CARB COMPARTMENT KIT

53-2122/$10.33

KEIHIN FUEL PUMP REBUILD KIT INCLUDES ALL PARTS NECESSARY TO REBUILD THE KEIHIN FUEL PUMP. FITS KAWASAKI 650SX 86-91, 650X2 89-91

53-2105/$17.22

KEIHIN OEM REPLACEMENT CARBURETOR POLARIS HURRICAN 700 96-07 39mm - OEM REPLACEMENT

53-2030/$110.70

KEIHIN CARB MIXTURE ADJUSTMENT KNOBS BILLET ALUMINUM, ANODIZED KNOBS WITH INDEX REFERENCE MARK FIT ON THE EXISTING ADJUSTMENT SCREWS OF KEIHIN 38/40mm CARBS TO MAKE MIXTURE ADJUSTMENT EASY. (DOES NOT FIT 42mm)

53-9993/$6.15

PUMP GASKET FOR CDKII 40mm

1202-850-2001/15.81

CARB SCREW ADJUSTING TOOL SPECIAL 90 DEGREE SCREWDRIVER DESIGNED TO ADJUST CARBS OF TRIPLE-CYLINDER WATERCRAFT.

53-9994/$21.65

ULTIMATE CARB GASKETS - THICK GREEN GASKETS

38mm

9200/$2.82

40mm

9205/$2.82

42mm

9220/$2.82

KEIHIN METERING BLOCK ASSEMBLIES - LARGE HIGH FLOW NEEDLE VALVE SEAT ASSEMBLY

2.0mm

53-2609/$27.68

KEIHIN COIL SPRINGS

42mm 40grm #1290-966-2000

116A/$1.85

42mm 70grm #1290-947-2000

116B/$1.85

40mm 40grm #1290-992-2000

116C/$1.85

40mm 70grm #1290-961-2000

116D/$1.85

THE BLACKJACK CARB IS A HIGH FLOW PERFORMANCE CARB DESIGNED TO BE USER FRIENDLY. IT USES A PROVEN ANNULAR DISCHARGE DESIGN WITH MODIFIED INTERNAL CIRCUITS. EASY TO TUNE AND THEY DON'T LOAD UP, EVEN UNDER EXTREME CONDITIONS. PRODUCE INSTANT THROTTLE RESPONSE WITH MORE BOTTOM END POWER, BETTER MID-RANGE ACCELERATION AND UNMATCHED TOP END.

44mm

53-2092/$316.28

46mm

53-2093/$370.72

48mm

53-2094/$438.13

48mm BUTTERFLY ONLY 12 DEGREE

48-012/11.14

RIVA YAMAHA RACING CARBURETORS FEATURE A SHORT PRESS FIT AIR BELL THAT TAPERS FROM A MASSIVE 70mm TO A TRUE 48mm THROTTLE PLATE. STARTING WITH PROVEN MIKUNI SUPER BN CARBS, EACH ONE IS HAND ASSEMBLED WITH TOP SHELF COMPONENTS. AT THE HEART IS RIVA'S EXCLUSIVE "POWER BOMB" FUEL ATOMIZER, PROVIDING PEAK PERFORMANCE UNDER ALL CONDITIONS. HESITATION AND BOGGING ARE ELIMINATED WHILE DELIVERING EXPLOSIVE ACCELERATION AND EXTREME TOP SPEED. AVAILABLE INDIVIDUALLY WITH FLAGE MOUNT OR SPIGOT MOUNT.

48mm FLANGE MOUNT

RY1200-R-48-1F/465.25

BUTTERFLY REBUILD KIT

RY12-TSRK/$46.90

SEA DOO 720 - MIKUNI 44mm CARB - K&N FLAME ARRESTOR

53-0915/$626.07

SEA DOO 720 - MIKUNI 46mm CARB - K&N FLAME ARRESTOR

53-0916/$785.97

SEA DOO 800 - MIKUNI 44mm CARB - K&N FLAME ARRESTOR

53-0925/$660.51

SEA DOO 800 - MIKUNI 46mm CARB - K&N FLAME ARRESTOR

53-0926/$819.18

YAMAHA-701 W/RDR / 760 (62T) - MIKUNI 44mm CARB - K&N FLAME ARRESTOR

53-0975/$713.40

YAMAHA-701 W/RDR / 760 (62T) - MIKUNI 46mm CARB - K&N FLAME ARRESTOR

53-0974/$870.84

YAMAHA-1100/1200 - MIKUNI 44mm - K&N FLAME ARRESTOR

53-0980/$885.60

YAMAHA-1100/1200 - MIKUNI 46mm - K&N FLAME ARRESTOR

53-0992/$1045.50

KAWASAKI-750 - MIKUNI 44mm - K&N FLAME ARRESTOR

53-0830/$750.30

KAWASAKI-750 - MIKUNI 46mm - K&N FLAME ARRESTOR

SINGLE CARB SYSTEM

KAWASAKI-SX/X2 - MIKUNI 44mm - K&N FLAME ARRESTOR

53-0650/$350.55

KAWASAKI-SX/X2 - MIKUNI 46mm - K&N FLAME ARRESTOR

53-0660/$417.64

KAWASAKI-750 ALL - MIKUNI 44mm - K&N FLAME ARRESTOR

53-0820/$350.55

KAWASAKI-750 ALL - MIKUNI 46mm - K&N FLAME ARRESTOR

53-0825/$417.64

KAWASAKI-650 ALL

53-0651/$93.36

KAWASAKI-750-ALL

53-0827/$93.36

RIVA YAMAHA-701/760 (62T/64X)

RY126M/$226.27

53-0652/$CALL

DUAL INTAKE MANIFOLDS FOR SEA DOO - FITS MIKUNI 44/46mm AND KEIHIN

SEA DOO 580/650/720

53-0923/$139.42

SEA DOO XP 800 DIRECT FLOW

223-80001/$170-97

SEA DOO XP 800 (ALSO FITS KEIHIN)

223-80000/$129.49

SEA DOO 951 (MUST USE WITH #273-95000 R&D STUFFERS)

223-95000/$166.79

YAMAHA 701 (62T) W/RDR/760

IM001/$249.65

RAD REED VALVE

RAD-131R/$139.73

YAMAHA 701 (62T) W/RDR/760 WITH BILLET CARB. PLATE FOR OEM REED

222-76000/$228.60

701 (62T) W/RDR/760 WITH BILLET CARB. PLATE FOR MOTO TASSINARI REED

226-76100/$CALL

MOUNTING PLATE GASKET - CENTER TO CETNER 120mm

12-0010/$2.80

YAMAHA (62T) WAVE RAIDER/760

13-2109/$159.90

YAMAHA GP 1200R/XLL-L OEM/MIKUNI W/STUFFER

232-12100/$CALL

YAMAHA GP800 WITH STUFFERS

222-80000/$171.15

KAWASAKI 800SXR WITH BILLET CARB PLATE FOR OEM REED

231-75146/$186.20

MOUNTING PLATE GASKET - CENTER TO CENTER 120mm

12-0010/$2.80

KAWASAKI 800SXR WITH BILLET CARB PLATE FOR MOTO TASSANARI REED

231-75148/$214.12

MOUNTING PLATE GASKET - CENTER TO CENTER 120mm

12-0010/$2.80

KAWASAKI BOYESEN KIT - INCLUDES 1 PRECISION CAST ALUMINUM INTAKE MANIFOLD, 2 "EV" RAD VALVES, 1 CARB ADAPTER PLATE AND ALL NECESSARY INSTALLATION HARDWARE. 800 SX-R (03-07)

IMK-002/$547-56

KAWASAKI 750 - CENTER TO CENTER 104mm

231-75144/$CALL

KAWASAKI 800SXR FOR MOTO TASSANARI REED

231-75144-MT/$CALL

ULTRA 150/STX-R KIT (USE WITH M-16 REED ONLY)

231-15000/$239.72

JET WORKS KAWASAKI ULTRA 150/STX-R (SOLD SEPARATELY WITH OEM REED)

53-0887/$69.53

CARBURETOR LINKAGE KITS

KEIHIN

53-0602/$CALL

MIKUNI

53-0622/$17.22

OEM CARB

53-0628/$CALL

CARBURETORS LINKAGE SLEEVES (ONLY)

5/8" 16mm

53-9905/$6.77

3/4" 19mm

53-9906/$6.77

1" 25mm

53-9916/$8.00

2-3/16" 56mm

53-9917/$13.53

6" 152mm

53-9918/$36.29

LINKAGE INSTALLATION TOOL FOR OEM CARB

53-0434/$27.06

MIKUNI DUAL CARBURETORS LINKAGE KIT

MK-BN/001/$11.91

JETWORKS LINKAGE - USING 120mm CENTER TO CENTER AFTERMARKET DUAL S/BN CARB APPLICATIONS. IT IS MADE TO HAVE ZERO BACKLASHES AND WILL NOT COMPRESS AFTER AGE.

LK-2/$34.55

TBM CARBURETOR SHAFT COLLARS - DESIGNED TO REPLACE THE E-CLIPS THAT COMMONLY BREAK ALLOWING THE CARB SHAFT TO VIBRATE SIDE TO SDIE DAMAGING THE BUTTERFLY'S AND CARB BODIES. MANUFACTURED FROM STAINLESS STEEL FOR CORROSION PREVENTION, THE 2-PIECE DESIGN ALLOWS INSTALLATION WITHOUT DISASSEMBLING THE CARBS.

TBM108/$41.21

MIKUNI THROTTLE ARM LINKAGE & CONVERSION ARM

THROTTLE ARM LH

53-0611/$CALL

THROTTLE ARM MIDDLE

53-0612/$CALL

THROTTLE ARM RH

53-0613/$CALL

MIKUNI GENUINE OEM STYLE LINKAGE RODS

SEA DOO XP800

53-0615/$9.38

SEA DOO 951

53-0616/$12.41

TRIPLE CARB LINKAGE ROD

53-0606/$CALL

HOT PRODUCTS ORIGINAL DRUM FOR MIKUNI CARBS - ALLOWS THE USE OF ANY THROTTLE CABLE AND BRACKET ON MIKUNI CARBS. 8 POSITIONS, 18mm THROW.

53-2622/$21.53

PJS DRUMS - FEATURES A CENTER WEB THIN ENOUGH TO ALLOW USE OF NUT WITH LOCK WASHER. "D" SLOT MATCH THE THROTTLE SHAFT FOR A PERFECT FIT. 12 POSITIONS AND AVAILABLE IN 20mm OR 25mm THROWS.

STANDARD SIZE 20mm THROW

53-2625/$24.60

OVERSIZED 25mm THROW FOR OIL INJECTION AND STOCK CARBS OF YAM GP/XL

53-2627/$30.75

DIAPHRAGM COVER MOUNT THROTTLE CABLE BRACKET - RECOMMEND FOR USE WITH HOT CABLE DRUM #53-2622 8mm HOLE

RY12-TCB/$30.75

10mm

N-TCB-K/$CALL

BODY MOUNT THROTTLE CABLE BRACKET

53-3310/$11.25

KAWASAKI / POLARIS / TIGERSHARK -10mm HOLE

53-3317/$19.62

SEA DOO / YAMAHA / WETJET - 8mm HOLE

53-3318/$19.62

MIKUNI SLOTTED CABLE DRUM FOR LINKAGE

53-2628/$CALL

MOTOINE SOFT SPRING FOR MIKUNI - IS 2/3 SOFTER THAN ORIGINAL SPRING AND REDUCES THUMB AND/OR FINGER THROTTLE FINGER

MR-00013/$12.24