FUEL SYSTEMS JET WORLD ORDER FORM

FUEL SYSTEMS
PART #
PRICE
FUEL PICKUP FOR ZXI/STX-R KAWASAKI ZXI/STX-R - PROVIDES MAX FUEL FLOW TO TRIPLE CARBS.
53-9957
$92.25
ADA PICKUP FOR ULTRA - KAWASAKI
KUFP
$47.67
BLOWSION FUEL FILLER FOR KAWASAKI SX/SXI/SXI-PRO/SXR - BILLET DUAL PICK UP
01-02-506
$152.46
BLOWSION FUEL FILLER FOR YAMAHA SUPERJET AND POLARIS OCTANE
BILLET DUAL PICK UP
01-02-502
$152.46
BILLET SINGLE PICK UP
01-02-501
$135.30
24-7 BILLET INTERNAL FUEL FILLER FOR YAMAHA SUPERJET
DUAL FUEL FILLER
DF-001

$CALL

SINGLE FUEL FILLER

SF-001

$CALL


BLOWSION RACING FUEL PICKUP FOR KAWASAKI SX/SXI/SXI-PRO/SXR

01-02-507

$103.93
FUEL TANK FILTER - UNIVERSAL REPLACES SEA DOO #275-500-005
53-9946
$2.58
FUEL TANK FILTER - UNIVERSAL REPLACES YAMAHA #8H5-224560-00
006-516
$1.91
ULTRA 250 DEEP FUEL PICKUP - THE R&D DEEP FUEL PICKUP IS DESIGNED TO MAXIMIZE FUEL VOLUME. THE STOCK FUEL PICKUP IS LOCATED HORIZONTALLY IN THE GAS TANK 3 INCHES ABOVE THE BOTTOM OF THE TANK. THIS LEAVES APPROX. 5 GALLONS OF UNUSABLE FUEL IN THE TANK. THIS DEEP FUEL PICKUP RELOCATES THE STOCK FUEL PICKUP TO THE BOTTOM OF THE TANK IN A VERTICAL POSITION. THE NEW POSITION ALLOWS FOR 24 PERCENT MORE RIDING TIME PER TANK OF GAS.
801-25100
$45.14
ONE WAY CHECK VAVLE - ONE WAY VENT ALLOWS FUEL TO TRAVEL IN ONE DIRECTION ONLY. 1/4" FUEL LINE.
53-9941
$3.57
RIVA HIGH VOLUME FILTER - 3/8" FUEL LINE
RY-0503
$11.77
2" SLIMLINE WITH BRONZE ELEMENT - CLEAR NYLON HOUSING AND BRONZE 75 MICRON ELEMENT. 2" LENGTH. 1/4" FUEL LINE.
53-9952
$1.85
3" SLIMLINE WITH POLYESTER ELEMENT - LIGHTWEIGHT HIGH FLOW 90 MICRON POLYESTER ELEMENT. 3" LENGTH. 1/4" FUEL LINE.
53-9953
$1.98
IN-LINE OIL FILTER - 75 MICRON STAINLESS STEEL ELEMENT. 1.3" DIAMETER, 1/4" FUEL LINE. THIS FILTER WORKS WITH FUEL AND OILS. PERFECT PROTECTION FOR OIL PUMPS AND OIL INJECTION ENGINES.
53-9943
$1.72
HIGH-CAPACITY HIGH FLOW FILTER - 80 MICRON PAPER ELEMENT. 1.6" DIAMETER. 1/4" FUEL LILNE.
53-9945
$2.28
HIGH PERFORMANCE CATALYTIC FILTER - MADE OF HIGH IMPACT NYLON. CLEAN BURNING ENGINES, BETTER THROTTLE RESPONSE AND SOME INCREASE IN POWER AND FUEL EFFICIENCY.
53-9948
$9.83
QUICK DISCONNECT RESTRICTOR - MIKUNI MAIN JETS THREAD INTO THE BILLET PART OF THE RESTRICTOR. THIS KIT IS USED ON THE RETURN LINES OF CARBS TO FINE TUNE FUEL PUMP PRESSURES. 1/4"
QD-14
$18.89
FUEL RETURN LINE RESTRICTOR - DESIGNED TO IMPROVE THROTTLE RESPONSE AND REDUCE LEAN CONDITIONS IN POWER BAND. INSTALLS INTO FUEL RETURN LINE BETWEEN CARBS AND FUEL TANK, RESTRICTING FUEL RETURN RATE, INCREASING PRESSURE TO CARBS. PRECISION MACHINED BILLET RESTRICTOR IS THREADED TO ACCEPT A MIKUNI MAIN JET (NOT INCLUDED) TO MATCH YOUR APPLICATION. FUR USE WITH OEM AND AFTERMARKET CARBS.
RY12-RLR-14
$14.76

RIVA FUEL FILTERS" OE REPLACEMENT FIT STOCK MOUNTING BRACKET IN ALL YAMAHA WATERCRAFT THESE FUEL FILTERS ALSO SERVE AS A WATER SEPARATOR PROTECTING MOTOR FROM WATER DAMAGE.
OE REPLACEMENT FILTER (ALL EXCEPT 66V/E)
RY-0501
$11.77
OE REPLACEMENT FILTER 66V/E
RY-0502
$11.77

FUEL LINE / PRIMER LINE

PART #

PRICE
1/4" FUEL LINE & 1/8" PRIMER LINE - MADE FROM A THICK WALLED POLYURETHANE TUBING. BOTH FUEL AND PRIMER LINE IS BLUE. SOLD PER FOOT OR 25FT PACK.
FUEL (1/4") PER FOOT
53-9970
$0.92
FUEL (1/4") 25FT/PACK
53-9970-25
$20.85
PRIMER LINE (1/8") PER FOOT
53-9980
$0.92
PRIMER LINE (1/8") 25 FT/PACK
53-9980-25
$20.85
PRIMER LINE DOULE LAYER CONSTRUCTED FUEL HOSE FOR PRIMER. 25FT/PK
53-9985
$CALL
FUEL FEED AND VENT HOSE - DESIGNED TO MEET FUEL HOSE SPECS OF SAE J1527 AND ISO 7840. BARRIER CONSTRUCTION PROVIDES THE LOWEST PERMEATION RATING AVAILABLE FOR ANY MARINE FUEL HOSE. FORMULATED TO HANDLE GAS, DIESEL & ALCOHOL BLENDED FUELS. MEETS ALL REQUIREMENTS OF THE USCG, NMMA, ABYC AND IS CERTIFIED BY IMCI FOR EUROPEAN COMMUNITY. THE 360 SERIES IS AN A-1 HOSE THAT CAN BE USED IN A FEED OR VENT APPLICATION. THE FLAME RESISTANT COVER IS DESIGNED FOR ENCLOSED ENGINE COMPARTMENT APPLICATIONS.
1/4" FUEL FEED & VENT HOSE 25FT/PACK
360-014
$CALL
PINCER TOOL
59-4015
$13.77
SQUEEZE ON STAINLESS STEEL CLAMPS
CLAMP FOR 1/4" HOSE (10PCS/PACK) - CLAMP SIZE 9/16
59-4016
$4.31
CLAMP FOR 3/8" WATER LINE (10PCS/PACK) - CLAMP SIZE 11/16
59-4017
$4.55
CLAMP FOR 1/2" WATER LINE (10PCS/PACK) - CLAMP SIZE 13/16
59-4018
$4.73
HOSE PINCHERS - QUICK, EASY WAY TO PINCH OFF FUEL LINES, ETC. WITHOUT DAMAGING THE FUEL LINE. SOLD 2 PER SET.
LS22850
$6.08
FUEL LINE Q/D W/SHUT-OFF VALVE FOR 1/4" FUEL LINE
53-9951
$14.15

PRIMER KITS

PART #

PRICE
PRIMER KITS-A CURE FOR HARD-STARTING MOTORS. DRAWS FUEL FROM THE FUEL LINE TO GIVE THE CARB A BLAST OF FUEL FOR EASY STARTING. ELIMINATES CHOKES AND ADDS TO BATTERY LIFE. A MUST ON HIGH-PERFORMANCE MODIFIED CARBS WITH ELIMINATED CHOKES. ASSEMBLED WITH TOP-QUALITY MATERIALS AND INCLUDE 9 FEET OF 1/8" BLUE PRIMER HOSE TO FIT SIT DOWN CRAFT. TOP QUALITY PLUNGER, BRASS "T" FITTINGS, SPIGOT, CAPS AND ZIP TIES.
MIKUNIK PRIMER KIT SINGLE
53-9920
$16.60
MIKUNI PRIMER KIT DUAL
53-9928
$21.52
MIKUNI PRIMER KIT TRIPLE
53-9922
$25.76
KEIHIN PRIMER KIT SINGLE
53-9925
$16.60
KEIHIN PRIMER KIT DUAL
53-9929
$22.69
KEIHIN PRIMER KIT TRIPLE
53-9924
$27.18
PARTS ONLY
PART #
PRICE
MIKUNI BRASS SPIGOT & CAP KIT
53-9921
$4.31
MIKUNI BRASS CAP ONLY
53-9921B
$1.85
KEIHIN BRASS SPIGOT & CAP KIT
53-9926
$4.31
KEIHIN BRASS CAP ONLY
53-9926B
$1.85

BRASS T FOR DUAL 1/8 x 1/8 x 1/8

64-0015
$2.83
BRASS T FOR DUAL 1/4 x 1/4 x 1/4
64-0017
$3.38
BRASS T FOR PRIMER 1/4 x 1/4 x 1/8
53-9980
$.92
PRIMER LINE 1/8 (SOLD PER FOOT)
53-9980-25
$20.85
1/4" HOSE BRASS FITTINGS
PART #
PRICE
STRAIGHT: 1/8" THREAD 1/4" HOSE
64-0001
$.98
90 DEGREE: 1/8" THREAD 1/4" HOSE
64-0010
$3.69
45 DEGREE: 1/8" THREAD 1/4" HOSE
64-0065
$6.09
BARB CONNECTOR 1/4" I.D.-1/4" I.D.
64-0057
$1.35
PRIMER ADD ON KITS - MIKUNI AND KEIHIN PRIMER ADD ON KITS FOR USE WITH DUAL AND TRIPLE CARB KITS. ONE ADD ON KIT NEEDED FOR DUALS, TWO FOR TRIPLES. KIT INCLUDES SPIGOT AND CAP, T-FITTING, 6" OF 1/8" BLUE PRIMER HOSE AND ZIP TIES.
MIKUNI PRIMER ADD ON
53-9923
$7.01
KEIHIN PRIMER ADD ON
53-9927
$7.01
PLUNGER PRIMER ONLY
53-9910A
$10.76
BUTTON PRIMER ONLY
53-9915
$11.37
PRESS IN NIPPLE
PART #
PRICE
1/8" STRAIGHT
53-9936
$2.15
1/4" STRAIGHT
53-9937
$1.85
PLASTIC "Y" FITTINGS
PART #
PRICE
1/4" x 1/4" x 1/4 (WHITE)
64-0046
$1.29
1/4" x 1/4" x 1/4" (BLACK)
64-0047
$.86

FUEL PUMPS

PART #

PRICE
MIKUNI HIGH VOLUME FUEL PUMP - 16 GALLONS/61 LITERS PER HOUR
FUEL PUMP
53-3328
$38.79
FUEL PUMP REPAIR KIT
53-3328RP
$12.30

CARBON REMOTE FUEL PUMP BRACKET - 100% CARBON. LIGHTWEIGHT AND BURLY.
01-02-556
$55.23

SPIGOT MOUNT FLANGE FOR MIKUNI CARBURETOR - FOR EASIER REMOVAL AND INSTALLATION OF CARB FOR JETTING AND MAINTENANCE. RECOMMENDED TO USE WITH SIDE DRAFT MANIFOLD ONLY.
I-VM40-200-1 (GOLD BAND)
1-VM44-200-1
$16.60
1-VM44-200-1 FOR SEA DOO 951 (BLACK BAND)
1-VM44-200-1
$16.60

SEA DOO DUAL FUEL PUMP UPGRADE KIT - A MUST FOR HIGH PERFORMANCE ENGINES WITH THE OEM DUAL CARBS WITH A SINGLE FUEL PUMP. KIT ADDS FUEL PUMP TO REAR CARB, ELIMINATING FUEL STARVATION AT HIGH RPM. INCLUDES PULSE FITTING AND HOSE.
53-3325
$49.20
KEIHIN CARBURETOR ADAPTERS FOR MIKUNI CARB MANIFOLDS
ADAPTER THAT ALLOWS MOUNTING OF KEIHIN CDK11 38, 42 CARB TO ANY POPULAR O.E. OR AFTERMARKET 44mm MIKUNI INTAKE MANIFOLD.
53-3305
$23.99
ADAPTER THAT IS DESIGNED TO MOUNT TO THE KEIHIN CDK11 38, 42 CARB SPECIFICALLY TO THE KAWI JS 440/550 PISTON PORT ENGINE.
53-3308
$34.27

BLOCK OFFS

PART #

PRICE

MIKUNI PUMP BLOCK OFF - ABSOLUTELY NECESSARY TOOL TO GET YOUR SET-UP PERFECT. ELIMINATES GUESSWORK AND WASTED TIME. FOR ALL BRANDS.
53-3330
$11.69

HOT PRODUCTS BILLET ALUMINUM OIL INJECTION BLOCK OFF

PART #

PRICE
SEA DOO - 580/650/720 ALL
50-9504
$8.00
SEA DOO - 800/951
50-9506
$8.00
POLARIS - SL/SLT650/750SLX/SL/SLT780 (COMES WITH CASE PLUG)/SLXPRO785
50-9502
$CALL
POLARIS - SL700/SLT700/HURRICANE/SL900/SLTX/1050 (OIL INJ. PLUG ONLY)
50-9509
$9.23
YAMAHA - 650/701/760
50-9500
$8.00
KAWASAKI - 650/750
50-9500
$8.00
YAMAHA - 1100/1200/GPR
50-9501
$8.00
KAWASAKI - 900/1100
50-9503
$8.00
CARB HOLDER PLUGS - 9/32" SOLD IN PK/1-PCS. UNIVERSAL PLUG.
53-9938
$CALL
PLASTIC CAPS - SMALL 1/8"
50-9500P
$1.05
PLASTIC CAPS - LARG 3/8"
50-9504P
$1.48
CASE BLOCK OFF - 650/750 (NOT APPLICABLE FOR 800SXR)
50-9505
$11.19

ROTARY VALVE PARTS

PART #

PRICE
ROTARY VALVE TIMING WHEEL
012-170
$7.69
STAINLESS STEEL ROTARY VALVES
580 ALL - 94-96 - 147 DEGREE OPENING DURATION
006-147
$36.84
650 ALL - 94-95 - 159 DEGREE OPENING DURATION
006-159
$24.54
720 - 95-02 - 159 DEGREE OPENING DURATION
006-159
$24.54
785 - 95-02 - 159 DEGREE OPENING DURATION
006-159
$24.54
SEA DOO ROTARY VALVE SHAFT & PARTS
A. ROTARY VALVE SHAFT - 580/650/720 OEM#293-837-251
010-455
$51.62
B. ROTARY VALVE SHAFT 800 - OEM #290-837-351
010-457
$51.62
C. ROTARY VALVE SHAFT GEAR ONLY (14 TEETH) 580/650/720/800 (89-UP) - OEM#420-935-735
010-450
$26.86
D. ROTARY COVER O-RING 580/650/720 - OEM #293-300-023
6250
$4.05
E. ROTARY COVER O-RING 800 - OEM #290-831-765
6628
$3.61
F. ROTARY SHAFT O-RING 580/650/720/800 - OEM #293-300-024
6260
$1.91
G. ROTARY SHAFT OIL SEAL 580/650/720/800 - OEM #290-930-580
009-779
$2.85

H. ROTARY SHAFT BEARING - OEM #290-932-032
580/650/720/800 - OEM 290-932-797

010-225
010-226

$7.75

$7.38

I. ROTARY SHAFT SPRING 580/650/720/800 - OEM#290-938-810
010-453
$1.66

J. ROTARY SHAFT SNAP RING - OEM #290-845-260
K. 580/650/720/800 - OEM #290-932-032

010-483
010-482

$1.17
$.36

L. ROTARY SHAFT C-CLIPS 580/650/720/800 - OEM #290-845-160
010-454
$.36
M. ROTARY SPRING HOLDER 580-650-720-800 - OEM #420-827-430
010-484-01
$2.26

N. ROTARY BEARING WASHER 580/650/720/800 - OEM #420-227-439

010-459
$.89
O. ROTARY SHAFT BARREL 580/650/720/800 - OEM #290-847-282
010-484
$2.77
ROTARY SHAFT PULLER - Special rotary shaft puller tool for Sea Doo. Fits most 580cc, 650cc, 720cc and 800cc Sea Doo engines. (Lubrication of all areas is required before using this tool.)
B-204
$21.53
JET WORLD ORDER FORM

email_animation.gif (20906 bytes)
JET-WORLD POWERSPORTS
(661) 294-0072 ph      (661) 294-5084 fax
32203 Castaic Road, Castaic, CA 91384

A TCI Website. Copyright 2008.