REPLACEABLE SEALED LAMP CAPSULE PROTECTS BULB AND ELECTRICAL CONTACT FROM THERMO-SHOCK AND CORROSION. LAUNCH AND LOAD AGAIN WITHOUT WATER PENETRATING. KIT CONTAINS TWO WATERPROOF LOW-PROFILE TAIL LIGHTS, TWO SEALED WATERPROOF AMBER SIDE MARKET LIGHTS, LICENSE PLATE BRACKET, 25" WISHBONE TRAILER HARNESS, 48" TRUNK CONNECTOR, MOUNTING HARDWARE AND INSTRUCTIONS. LIGHTS (BULB REPL. CAPSULES) AND LENS SET (TAIL AND SIDE) AVAILABLE SEPARATELY.

LOW-PROFILE TAIL LIGHT KIT

TAIL LIGHT (LEFT)

TAIL LIGHT (RIGHT)

REPLACEMENT LENS SET

REPLACEMENT BULB CAPSULE

WESTBAR SUBMERSIBLE TAIL LIGHT KIT - LAUNCH AND LOAD AGAIN AND AGAIN, WATER CANNOT PENETRATE THE CAPSULE. PRE-WIRED WITH MOLDED PLUGS FOR EASY INSTALLATION. KIT CONTAINS 2 MULTIFUNCTION TAIL LIGHTS WITH GASKETED LENSES, 2 STUD-MOUNT AMBER SIDE MARKER LIGHTS, LICENSE PLATE BRACKET, 25' WISHBONE TRAILER HARNESS, 48' TRUNK CONNECOTR, HARDWARE AND INSTRUCTIONS. DIRECT REPLACEMENT FOR MOST NEWER KARAVAN, SHORELAND'R AND EZ LOADER TRAILERS.

WESBAR OVAL TAIL LIGHT KIT - WATERPROOF DESIGN PERFORMS STOP, TURN & TAIL LIGHT FUNCTIONS. SEALED LENS AND HOUSING UNIT HAS SHOCK-MOUNTED DUAL FILAMENT BULM LIGHT AVAILABLE SEPARATELY. SOLD EACH - ORDER 2 KITS OR 2 LIGHTS TO HAVE ONE FOR EACH SIDE.

WESBAR DELUXE TAIL LIGHT KIT - FOR TRAILERS UNDER 80" WIDE. DIVING BELL/TRAPPED AIR SYSTEM KEEPS BULBS DRY; 2 STANDARD SIDE MARKET LIGHTS COMPLETE THE PACKAGE. KIT CONTAINS 2 -MULTIFUNCTION, FULLY SUBMERSIBLE TAIL LIGHTS WITH GASKETED LENSES, 2 STUD-MOUNTED AMBER SIDE MARKER LIGHTS, LICENSE PLATE BRACKET, 25' WISHBONE TRAILER HARNESS, 48" TRUNK CONNECTOR, HARDWARE AND INSTRUCTIONS. REPLACEMENT LENSES AVAILABLE SEPARATELY.

LENS (SIDE LIGHT)

1706-0134

WESBAR TAIL LIGHT KIT - STANDARD TAIL LIGHTS AND WIRING FOR A WIDE VARIETY OF TRAILERS. SPECIFICALLY DESIGNED FOR TRAILERS UNDER 80" WIDE; WITH CLEARANCE LIGHTS AND ID BARS, KIT MEETS LIGHTING REQUIREMENTS FOR TRAILERS 80" WIDE AND WIDER. KIT CONTAINS 2 MULTIFUNCTION TAIL LIGHTS, 2 STUD-MOUNTED AMBER SIDE MARKER LIGHTS, PLASTIC LICENSE PLATE BRACKET, 20' WISHBONE TRAILER HARNESS, 48" TRUNK CONNECTOR, MOUNTING HARDWARE AND INSTRUCTIONS. TAIL LIGHTS, AMBER SIDE MARKER LIGHTS AND REPLACEMENT LENSES ALSO AVAILABLE SEPARATELY (SOLD EACH.

TAIL LIGHT (RIGHT HAND)

1706-0125

RECTANGULAR TAIL LIGHT - SAME COMBINATION REAR LAMP FOR IN-FRAME MOUNTING USED ON MANY NEWER-STYLE TRAILERS WITH A SIDE LENS. USE IN ANY STOP-TAIL-TURN APPLICATION. MEASURES 2 1/2" W x 9" L; SOLD EACH.

WESBAR ROUND MARKER AND CLEARANCE LIGHTS & TRAILERS - LENS IS WELDED TO HOUSING TO FORM A WATERPROOF MODULE. 2" LIGHT MEETS REQUIREMENTS FOR BOTH SIDE MARKER LIGHT & CLEARANCE LAMP IF MOUNTED AT 45 DEGREE ANGLE. FLUSH MOUNTING REQUIRES USE OF SHOCK MOUNT GROMMET.

SKEEKEEPER HITCH PIN - FEATURES THE PATENTED PERMA CLIP JUST SWIVEL THE CLIP OUT OF THE WAY WITHOUT LOOSENING ANY PARTS. FITS ANY RECEIVER-STYLE HITCH WITH A 2" INSERT.

HITCH PIN ONLY

TS-68

WESBAR BEARING PROTECTOR WITH BRA TWO GREAT FEATURES IN ONE PRODUCT: WHEEL BEARING PROTECTOR WITH BRA THAT CAPTURES ANY GREASE RELEASED BY PRESSURE RELIEF. NO MORE GREASE ON WHEELS. MEASURE INNER DIAMETER OF HUB TO OBTAIN PROPER SIZE; SOLD IN PAIRS.

BEARING BUDDY - THE ULTIMATE IN WHEEL BEARING PROTECTION REPLACES DUST CAP ON TRAILER HUB FOR EASY LUBRICATION AND MAX PROTECTIN. PREVENTS BEARING FAILURE, DEEPS WATER AND DIRT OUT OF HUBS. BEARINGS RECEIVE CONSTANT LUBRICATION, NEVER NEED TO BE REPACKED. QUALITY CONSTRUCTION, HEAVY CHROME PLATED BARREL, STAINLESS STEEL INTERNAL PARTS.

1-3/4" HUB

BB1781

2" HUB

BB1980

2-5/16" HUB

BB2328

BEARING BUDDY II WITH AUTO CHECK - VISUAL LUBRICANT AND PRESSURE INDICATOR - FITS 2" HUB.

BB1985

MC-11 WATERPROOF GREASE - WHEEL BEARING AND CHASSIS LUBE

FULTON RECEIVER/HITCH LOCK COMBO SIMPLE AND QUICK TO USE. RESISTS RUST, CLOGGING AND CORROSION. LOCKS ARE KEYED ALIKE FOR CONVENIENCE. DOUBLE PROTECTION FOR HITCH AND RECEIVER. FITS 5/8" RECEIVER.

FULTON RECEIVER LOCKS HIGH-STRENGTH CAST LOCK BODY WITH CORROSION-RESISTANT FINISH. QUICK-ACTION LOCK FOR EASY LATCHING. VINYL LOCK COVER KEEPS ROAD DEBRIS OUT. AVAILABLE WITH 1/2" OR 5/8" PIN.

5/8" DIA. PIN FOR 2" x 2" RECEIVER

1703-0006

FULTON RECEIVER/COUPLER LOCK SET - PACKAGE INCLUDES 5/8" RECEIVER LOCK AND 1/4" COUPLER LOCK KEYED ALIKE FOR CONVENIENCE. EASY TO USE PUSH-BUTTON LOCK MECHANISM. BARREL KEY CONSTRUCTED OF DIE-CAST STEEL FOR IMPROVED RELIABILITY OF KEY FUNCTION. PROTECTIVE CAP HELPS PREVENT DIRT AND MOISTURE FROM GETTING INTO MECHANISM.

PREMIUM COUPLER LOCKS CHOICE OF STAINLESS STEEL OR TRIPLE CHROME-PLATED HARDENED STEEL. CAN'T POP OPEN OR BE FALSELY LOCKED. DESIGN INCORPORATES O-RING AND WATERTIGHT CAP TO HELP SEAL OUT DIRT AND CORROSION FROM THE LOCK HEAD MECHANISM. FULL-LENGTH SOLID FORGED LOCK PIN CAN'T PULL OUT. AVAILABLE INDIVIDUALLY OR IN KEYED-ALIKE SETS.

INDIVIDUAL HARDENED STEEL LOCKS

FOR COUPLERS WITH UP TO 7/8" SPAN

4010-0039

FOR COUPLERS WITH UP TO 9/16" SPAN

4010-0040

FOR COUPLERS WITH UP TO 2-1/2" SPAN

FOR COUPLERS WITH UP TO 3-1/2" SPAN

KEYED-ALIKE HARDENED STEEL LOCK SETS

ONE 5/8" DIA. LICK AND ONE 9/16" SPAN LOCK

4010-0044

ONE 5/8" DIA. LOCK AND ONE 2-1/2" SPAN LOCK

ONE 5/8" DIA. LOCK AND ONE 3-1/2" SPAN LOCK

INDIVIDUAL STAINLESS STEEL LOCK

FOR COUPLERS W/UP TO 9/16" SPAN

4010-0043

KEYED-ALIVE STAINLESS STEEL LOCK SET

ONE 5/8" DIA. LOCK AND ONE 9/16" SPAN LOCK

GORILLA GUARD PWC BOW LOCK - 6 1/4" LOCK LENGTH.

FLIP-TIP RECEIVER PIN - POLISHED STAINLESS STEEL. 5/8" PIN FOR ALL CLASS III, IV AND V RECEIVERS. EASY OPERATION - TIP SNAPS FIRMLY INTO PLACE TO INSTALL OR REMOVE.

1/2" FOR CLASS I AND II RECEIVERS

4010-0036

5/8" FOR CLASS III, IV AND V RECEIVERS

4010-0037

MACHINE HARDENED STEEL LOCKING PINS - QUARTER TURN LOCKS/UNLOCKS HEAD. TRIPLE-PLATED CHROME FINISH OR BLACK EPOXY POWDER-COATED FINISH.

MULTI-USE CABLE LOCKS - FEATURE 10' x 10mm TRIMAFLEX ULTRA-TOUGH BRAIDED CABLE.

WESBAR FAS-LOK COUPLERS - STRAIGHT TONGUE STAMPLED FAS-LOK MECHANISM FOR QUICK, EASY HOOKUP. LOCK HOLES FOR ADDITIONAL TRAILER SECURITY. CHOOSE FROM 1 1/8" AND 2" BALL MODELS. REPAIR KIT ALSO AVAILABLE; SOLD SEPARATELY.

BALL SIZE 2, CHANNEL WIDTH 2, SAE CLASS II

1706-0141

SKEEKEEPER BOW PIN
Fits trailer with 5/8" bow coupler.

TS67

$8.00

BOW STOP
Fastens with U bolts. 3-1/2" opening.

PWC-5A

$12.73

2" BOW STOP - Fits 2" wide bracket for 1/2" shaft.

PWC-9

3" END CAP - For 1/2" shaft.

$3.14

BUNK MATES - MAKE MOVING WATERCRAFT ON AND OFF TRAILER QUICK AND EASY. MOUNTS DIRECTLY TO TRAILER BUNK. READY TO INSTALL WITH SET OF SIX STAINLESS STEEL MOUNTING HARDWARE. NONABRASIVE MATERIAL WON'T HARM HULL. MEASURE 12" L x 2" W EACH.

WESBAR BUNK CARPET - 12" x 144" MARINE-GRADE CARPETING. DO-IT-YOURSELF TO REPLACE WORN & DIRTY CARPET ON BUNK TRAILERS.

3902-0008

4-WAY CONNECTORS - MALE 6" LEADS - FLAT

WP1005

FEMALE 48" LEADS - FLAT

WP1008

4-WAY EXTENSION HARNESS -INEXPENSIVE 2-FOOT EXTENSION FEATURES FOUR-WAY TRUNK CONNECTOR ON ONE END; FOUR WAY TRAILER CONNECTOR ON THE OTHER END. PERFECT FOR THOSE "JUST IN CASE" SITUATIONS.

1706-0166

JET SKI CARRIER

VH-JS

SINGLE MOTORCYCLE CARRIER

VH-55

SINGLE MOTORCYCLE CARRIER WITH RAMP

VH-55 RO

MOTORCYCLE RAMP KIT

VH-55 RK

DOUBLE MOTORCYCLE CARRIER

VH-55 DM

DOUBLE MOTORCYCLE CARRIER WITH RAMP OPTION

VH-55 DM RO

SPORT MOTORCYCLE CARRIER

VH-SPORT

SPORT MOTORCYCLE CARRIER WITH RAMP OPTION

VH-SPORT RO