| FLUSH
KITS / ADAPTERS |
PART
# |
PRICE |
| SEA DOO ' 93-02-
ALL NON-REAR DRAIN PIPE MODELS |
A7001 |
|
| SEA DOO '95-02
- LONG VERSION OF REAR DRAIN PIPE MODEL |
A7003 |
|
SEA DOO
'96-02 - SHORT VERSION OF REAR DRAIN PIPE MODEL & 95-97
SPORTSTER/CHALLENGER JET BOAT (SINGLE ENGINE)  |
|
|
SEA DOO
' 95-06 - ALL WITH REAR DRAIN PIPE  |
|
|
YAMAHA
' 87-98 LONG - ALL NON-FACTORY INSTALLED FLUSH KITS EXCEPT 760/800/1200  |
|
|
YAMAHA
' 87-98 LONG QUICK SNAP - ALL NON-FACTORY INSTALLED FLUSH KITS
EXCEPT 760/800/1200  |
|
|
YAMAHA
' 95-02 FACTORY REPLACEMENT - GP 760/110/1200 & JET BOAT  |
|
|
KAWASAKI
'89-91 JET SKI, ULTRA 150)  |
|
|
KAWASAKI
' 92-02 JET SKI - EXCEPT ZXI/ STX/ULTRA  |
|
|
KAWASAKI
' 95-02 ZXI, STX, ULTRA 150  |
|
|
KAWASAKI
03-05 4 STROKE -  Easy
way to flush your new Jet Ski. Just screw on the fitting and
leave it. Attach a quick-snap fitting to a garden hose and you
are ready to flush. |
|
|
| POLARIS - '90-02
- EXCEPT DIRECT INJECTION |
A6000 |
|
| POLARIS - '01-02
- DIRECT INJECTION |
A6001 |
|
| TIGERSHARK -
94-99MODELS |
A5000 |
|
| HONDA - MALE
QUICK SNAP ADAPTER ONLY |
A5200 |
|
| UNIVERSAL - MALE
QUICK SNAP ADAPTER ONLY |
A2690 |
|
| BLOWSION
ENGINE FLUSH KITS - A MUST FOR SALT WATER RIDERS!
ALL METAL CONSTRUCTION & EASY TO USE. JUST PUSH IN AFTERMARKET
BYPASS. NO TOOLS, CLAMPS OR EXTRA HOSES NECESSARY. BACK FLUSHES
ENTIRE COOLING SYSTEM INSTEAD OF FORCING SALT AND SAND INTO
COOLING JACKETS. USE IN CONJUNCTION WITH SALT TERMINATOR. SIMPLE
& EFFECTIVE.
|
| STANDARD FLUSH TOOL |
AWAC172 |
|
| SXR FLUSH TOOL-TRIPLE |
AWAC170 |
|
|  FLUSH
KIT ADAPTER - FOR ADAPTING OVERSEAS SPECIAL
SIZEHOSE TO CONNECT FLUSH KIT.  THIS
ADAPTER IS A DIRECT TO FIT TO THE REAR DRAIN LINE ON SEA DOO
AND KAWI 4 STROKE WATERCRAFT.
|
|
|
| SNAP CONNECT
AND FLOW CONTROL - THIS
KIT INCLUDES ADAPTER SC-2905 ABOVE AND ALSO INCLUDES A QUICK
DISCONNECT THAT FEATURES A ON/OFF WATER VALVE TO MAKE FLUSHING
THE WATERCRAFT A SIMPLE AND EASY PROCESS. |
|
|
| PLASTIC
GARDEN HOSE ADAPTER 
|
|
$2.15 |
| QUICK
CONNECT - THE ULTIMATE IN WATERLINE CONNECTIONS.
FITTINGS ARE SAFE FOR HIGH TEMPS AND HIGH PRESSURE. |
| FEMALE 1/4" PIPE THREAD |
|
$7.56 |
| FEMALE 3/8" IN LINE |
|
$8.55 |
| FEMALE 3/8" PANEL MOUNT |
|
$14.02 |
| MALE (BARBED) 3/8" WITH SHUT
OFF |
|
$7.85 |
| MALE 3/8" WITHOUT SHUT OFF |
|
$2.40 |
| FEMALE 1/2" IN LINE MALE
1/2" IN LINE |
64-0115 MALE
64-0117 FEMALE
|
$8.00
$16.17 |
| MORE
FITTINGS |
PART
# |
PRICE |
| BRASS
FITTINGS |
| 1/8" PIPE THREADED JUNCTION |
|
$2.40 |
| 1/8" TO 1/4" ADAPTER |
|
$2.03 |
| 9mm YAMAHA FLUSH ADAPTER |
|
$3.14 |
| BARB CONNECTOR
- 1/4" / 3/8" / 1/2" |
1/4"#64-0057
3/8" #64-0058
1/2" #64-0059
|
$1.35
$1.72
$2.34 |
| GARDEN
HOSE ADAPTER - 3/8" / 1/2" |
3/8" #64-0012
1/2" #64-0014
|
$4.61
$4.61 |
| STRAIGHT
HOSE BARBED  |
| 1/8" THREAD 1/4" HOSE |
|
$0.98 |
| 1/8" THREAD 3/8" HOSE |
|
$1.46 |
| 1/4" THREAD 1/2" HOSE |
|
$2.12 |
| 90
DEGREE |
| 1/8" PIPE THREAD 3/8"
HOSE |
|
$2.15 |
| 1/4" PIPE THREAD 1/2"
HOSE |
|
$3.38 |
| 1/8" PIPE THREAD 1/4"
HOSE |
|
$3.69 |
| 45
DEGREE |
| 1/8" PIPE THREAD 1/4"
HOSE |
|
$6.09 |
| 1/8" PIPE THREAD 3/8 HOSE |
|
$4.86 |
| 1/4" PIPE THREAD 1/2 HOSE |
|
$8.55 |
| "T"-FITTING |
| PRIMER FITTING 1/8"X1/8"X1/8" |
|
$2.83 |
| PRIMER 1/4"X1/4"X1/8" |
|
$3.38 |
| FUEL LINE 1/4"X1/4"X1/4" |
|
$6.52 |
| PLASTIC
"T" FITTING |
| 3/8"X3/8"X3/8 |
|
$1.27 |
| 1/2"X1/2"X1/2" |
|
$1.41 |
| PLASTIC
"Y" FITTING |
| 3/8"X3/8"X3/8"
WHITE |
|
$2.09 |
| 1/4"X1/4"X1/4"
WHITE |
|
$1.29 |
| 1/4"X1/4"X1/4"
BLACK |
|
$0.86 |
| WATERLINE-BYPASS-CLAMPS |
PART
# |
PRICE |
| WATER
LINE HOSE - SYNFLEX HOSE  OFFERS
A NUMBER OF BENEFITS, INCLUDING FLEXIBILITY, DURABILITY, ABRASION
RESISTANCE, LIGHTER WEIGHT MATERIAL, SUPERIOR CHEMICAL RESISTANCE,
HIGH PRESSURE CAPABILITY AND EXTENDED PRODUCT PERFORMANCE. SOLD
PER FOOT. |
|
|
|
|
|
|
3/8 CLEAR VINYL
- IS NOT SYNFLEX HOSE
|
|
|
 3/8"
LIGHT BLUE - FLEX-TECH MULTI PURPOSE HOSE IS MORE FLEXIBLE AND
BENDABLE FOR THOSE COMPLICATED WATER ROUTING REQUIREMENTS. HIGHLY
RECOMMENDED FOR FACTORY AND TBM DRY PIPE INSTALLATIONS. SOLD
PER FOOT. |
|
|
| WATERLINE
RESTRICTOR - ADAPTER FOR BYPASS FITTING - THESE
SPECIALLY DESIGNED RESTRICTORS HAVE BEEN DEVELOPED TO FIT SNUGLY
INTO A 3/8" BYPASS LINE WITH A 4mm INSIDE DIAMETER TO RESTRICT
THE WATERFLOW EXITING THE EXHAUST OR ENGINE DEPENDING ON WATER
ROUTING SETUP. |
56-9003 |
|
| 45"
BYPASS FITTING - 45 DEGREE ANGLED -  THESE
FITTINGS INCREASE ENGINE PERFORMANCE BY DEVERTING WATER FROM
THE CYLINDER HEAD TO THE BYPASS FITTING, RATHER THAN FORCING
ALL OF THE WATER THRU THE EXHAUST SYSTEM, THUS DRYING OUT THE
EXHAUST. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| 90"
BYPASS FITTING - 90 DEGREE ANGLED.
THESE FITTINGS INCREASE ENGINE PERFORMANCE BY DIVERTING WATER
FROM THE CYLINDER HEAD TO THE BYPASS FITTING RATHER THAN FORCING
ALL OF THE WATER THRU THE EXHAUST SYSTEM, THUS DRYING OUT THE
EXHAUST. RACE LEGAL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GP1300R
1/2" X 1/2" BULKHEAD FITTINGS 
- ALLOWS FOR EASY INSTALLATION FOR EXTRA COOLING LINES THRU
BULK HEAD. |
|
|
GP1300
/ GP1200R 1/2" INLINE WATER FILTER  -
UTILIZES A SCREW-IN STAINLESS STEEL MESH SCREEN TO STOP SMALL
PARTICLES OF SAND FROM ENTERING THE ENGINE WATER WAY. |
|
|
STAINLESS
STEEL HOSE CLAMPS 
#5 CLAMPS FOR WATERLINE |
|
|
SQUEEZE
ON STAINLESS STEEL CLAMPS & PINCER TOOL  THESE
CRIMP ON CLAMPS ARE QUICK AND SIMPLE TO INSTALL. CRIMP ON CLAMPS
ARE EXTREMELY STRONG AND DO NOT BREAK SINCE YOU CAN NOT OVER
TIGHTEN THEM LIKE A CONVENTIONAL HOSE CLAMP.
|
|
|
|
CLAMP FOR 3/8"
WATER LINE (10 PCS/PK)
|
|
|
CLAMP FOR 1/2"
WATER LINE (10PCS/PK)
|
|
|
PLASTIC
HOSES & FITTINGS 
|
|
|
|
|
|
|
|
57-4011 |
|
| STRAINERS-FLOW
CONTROL |
PART
# |
PRICE |
| WATER
STRAINER
- A MUST TO TRAP ALL SAND, SHELL AND VEGITATION PARTICLES.
NO MORE CLOGGED WATER LINES! HEIGHT = 2" (51mm) FOOTPRINT
= 2-1/2" (64mm) |
|
|
|
|
|
|
#20/#40
MESH REPLACEMENT WITH O-RING. #40
IS FINER THAN # 20
|
#20
- 20420020 / #40 - 20420040
|
|
 LOW
PROFILE WATER STRAINER - SMALLER WATER STRAINERS.
IDEAL FOR USING WITH WATER INJECTION OR TIGHT SPACE. HEIGHT
2-3/8" (60mm) FOOTPRINT 1-3/8" (35mm) ROUND
|
LOW
PROFILE 1/2" WATER LINE STRAINER
|
|
|
LOW
PROFILE 3/8" WATER LINE STRAINER
|
|
|
#20/#40
MESH REPLACEMENT. #40 IS FINER THAN # 20
|
|
|
 JET
WORKS QUICK DISCONNECT WATER RESTRICTOR
3/8" OR 1/4" - #QD-38 COMES WITH 4/3/2mm RESTRICTOR
INSERTS USED FOR CONTROLLING WATER FLOW THRU EXIT PASSES, STINGER,
HEAD PIPES, ETC. #QD-14 IS FOR USE WITH MIKUNI JETS (NOT INCLUDED)
AND ALLOWS QUICK CHANGE IN SMALL INCREMENTS OF WATER FLOW. |
3/8" - #QD-38
1/4" - #QD-14
|
|
JET
WORKS FLOW CONTROL VALVE  PROVIDES
IMPROVED THROTTLE RESPONSE AND MUCH QUICKER STARTS BY DRYING
OUT WATERBOX AT LOW RPM AND IDLE SPEEDS. TESTS HAVE SHOWN AN
AVERAGE ACCELERATION IMPROVEMENT OF 10 FEET OVER A NON-EQUIPPED
MODEL IN THE FIRST 50 FEET. THE FLOW CONTROL VALVE ALLOWS UNRESTRICTED
WATER FLOW TO THE STINGER FOR BETTER TOP SPEED. ALSO ALLOWS
FOR AN EASIER TUNING OF THE CARBURETORS. DOES NOT INTERFERE
WITH NORMAL ENGINE OR EXHAUST PIPE COOLING AND IS COMPATIBLE
WITH ALL ELECTRONIC WATER INJECTION SYSTEMS. RACE LEGAL FOR
ALL CLASSES.
|
STANDARD FLOW
CONTROL VALVE 3/8"
|
|
|
PRO FLOW CONTROL
VALVE 3/8"
|
|
|
PRO FLOW CONTROL
VALVE 1/4"
|
|
|
 RIVA
EXHAUST STINGER WATER FILTER/RESTRICTOR - FEATURES
FINE MESH STAINLESS FILTER SCREEN THAT IS THREADED TO ACCEPT
MIKUNI MAIN JET (NOT INCLUDED) FOR WATER RESTRICTION. ALLOWS
REMOVAL OF RESTRICTIVE FILTER SCREEN IN WATER DISTRIBUTION MANIFOLD
OF SINGLE, TWIN AND TRIPLE EXHAUST SYSTES, PROVIDING INCREASED
COOLING WATER TO MOTOR. 3/8" |
|
|
JET
WORKS ADJUSTABLE WATER RESTRICTOR  -
ALLOWS USER TO ADJUST FLOW ON ANY 3/8"
WATERLINE. A GREAT PRODUCT FOR FINE TUNING ENGINE/EXHAUST TEMPERATURE
FOR MAXIMUM POWER. |
|
|
FOR
FACTORY PIPE CHAMBER WATERLINE -  WATERLINE
INLINE FILTER |
|
|
RULE
STRAINER BASE & S/S DEBRIS STRAINER 
|
BLUE PLASTIC STRAINER
BASE
|
|
|
GAS RESISTANT STRAINER
BASE
|
|
|
STAINLESS STEEL
DEBRIS STRAINER
|
|
|
| BILGE
PUMPS |
PART
# |
PRICE |
RULE 500
GPH - 3/4" HOSE 3 1/2" HEIGHT(89mm)  |
|
|
800 GPH
- 3/4" HOSE 3 3/4" HEIGHT(96mm)
|
|
|
1100 GPH
- 1 1/8" HOSE 4 1/4 HEIGHT(108mm)  |
|
|
PWC AUTOMATIC
500 GPH PUMP  |
|
|
RULE-MATE
FULLY AUTOMATED BILGE PUMP  - ALL IN ONE PUMP & SWITCH SYSTEM. HEAVY DUTY MOTOR.
NON-CONTACT, MERCURY FREE FLOAT SWITCH.
|
500 GPH 3/4"
HOSE 4"HEIGHT (102mm)
|
RM500 |
|
750 GPH 3/4"
HOSE 4" HEIGHT (102mm)
|
|
|
1100 GPH 1 1/8:
HOSE 4" HEIGHT (102mm)
|
|
|
| BILGE
FITTINGS |
PART
# |
PRICE |
STRAIGHT
BILGE FITTING  - 3/4" SILVER |
|
|
|
|
|
|
|
|
45 DEGREE
BIGLE FITTING - 3/4" SILVER OR BLACK  |
57-4021
57-4023 |
|
| PUMP
BRACKETS |
PART
# |
PRICE |
 SXR
800 RULE BRIDGE MOUNT BRACKET - R&D BILGE
PUMP MOUNT BRACKET BOLTS SECURELY TO THE HULL DEVELOPING A SECURE
SURFACE TO HOLD THE BILGE PUMP IN PLACE. |
|
|
DUAL
BILGE PUMP MOUNTING BRACKET 
|
|
|
|
|
|
|
BILGE
PUMP BRACKET 
|
YAMAHA WAVEBLASTER
/ 701 SJ 95+
|
|
|
|
|
|
KAWASAKI 650SX/X2
550SX / 750SX / SXI
|
|
|
|
|
|
SE
BILGE PUMP BRACKET 
|
|
|
|
|
|
|
|
ELECTRICAL |
PART
# |
PRICE |
|  BILGE
/ ELECTRICAL PARTS KIT - CONTAINS WATERPROOF
FUSE HOLDER, 6 AMP FUSE, RING TERMINAL, SHRINK TUBING
|
|
|
WATERPROOF
TERMINAL KIT
- 2 PIN / 3 PIN / 4 PIN
|
2 PIN #55-2050
3 PIN #55-2051
4 PIN #55-2052 |
|
 JAPANESE
OEM STYLE CONNECTOR - 5PC/PACK OR 20 PC/PACK |
|
|
 ADHESIVE
LINED HEAT SHRINK BUTT CONNECTORS - BEST USED
WHERE WATER & CORROSION IS A PROBLEM. AFTER CRIMPING THESE
TERMINALS TO WIRE, HEAT IS APPLIED ENABLING THE ADHESIVE WITHIN
EACH TUBE TO MELT AND FLOW EVENLY TO SEAL THE CONNECTION AGAINST
THE HARSHEST ENVIRONMENT.
|
10 PCS/PACK PINK OR 100 PCS/PACK
PINK
|
|
|
10 PCS/PACK BLUE OR 100 PCS/PACK
PINK
|
55-2042 / 55-2043 |
|
 JAPANESE
OEM TYPE WATERPROOF TERMINAL REPAIR KIT - USING
THE PRECISION CRIMP TOOL PROVIDED, GUESS WORK IS ELIMINATED.
VARIOUS PIN SIZED, CONNECTORS AND WATERPROOFING SEALS. |
|
|
| WATERPROOF
SWITCHES |
PART
# |
PRICE |
| YAMAHA ALL |
|
|
| KAWASAKI ALL
650's / 750 SS ' 95 / XI ' 93 |
|
|
| 440 / 550 / 750SX / 750 SXI /
800 SXR |
|
|
| HANDLE
BAR MOUNT UNIVERSAL |
|
|
| STANDARD
SWITCH WITH 9 FT. OF WIRE |
|
|
|  3-WAY
PANEL MOUNT ROTARY SWITCH - CONNECTS TO 2 ELECTRONIC
ACCESSORIES FOR POWER CONTROL. SUGGESTED USES: SECOND BILGE,
IGNITION, BLOWER
|
57-3020 |
|
|  UNIVERSAL
HANDLEBAR MOUNT SWITCH - MOUNTS TO UNDERSIDE
OF MOST AFTERMARKET THROTTLE LEVERS. COMPLETE WITH 9'WIRE. 12V/6A
PUSH ON/OFF SWITCH.
|
|
|
| UNIVERSAL
HANDLEBAR MOUNT SWITCH - MOUNTS TO UNDERSIDE
OF MOST AFTERMARKET THROTTLE LEVERS. COMPLETE WITH 9'WIRE. 12
VOLT/5 AMP 3 WAY ROTARY SWITCH. |
|
|
| PANEL MOUNT
SWITCH GUARD |
|
|
| DUCK
BILL DRAIN SYSTEM |
PART
# |
PRICE |
DRAINS
WATER FROM HULL UNDER ACCELERATION - ADD TO YOU CURRENT DRAIN
PLUG OR
 PURCHASE
ENTIRE SYSTEM KIT. |
SEA
DOO ALL (EXCEPT XP)/ YAMAHA/KAWASAKI ALL SITDOWNS (KAWASAKI REQUIRES SLIGHT MOD)  |
|
|
UNIVERSAL
(COMPLETE SYSTEM) |
57-4060 |
|
DUCK
BILL FLAPPER ONLY  3"
(80mm) x I.D. 1" (25mm) |
|
|
BILLET
QUICK DRAIN FOR KAWASAKI -  1200
STX-R, 800 SXR - MOUNTS TO THE TRANSOM OF KAWASAKI WITH BILLET
ALUMINUM MOUNTING PLATE. |
|
|
UNIVERSAL
BILLET QUICK DRAIN KIT- MOUNTS TO THE TRANSOM
OF ANY WATERCRAFT WITH BILLET ALUMINUM MOUNTING PLATE.  |
|
|
DRAIN
PLUG -  THE
REPLACEMENT DRAIN PLUG AT A FRACTION OF MANUFACTURER'S PRICES.
OUR FLOATING DRAIN PLUG IS OIL AND FUEL RESISTANT. JUST FLIP
OR TWIST TO INSTALL. |
|
|
 DUCK
BILL DRAIN ADAPTER PLUG - UNSCREW STOCK DRAIN
PLUG AND SCREW OUR DUCK BILL DRAIN PLUGS IN PLACE. KAWASAKI
/ YAMAHA |
KAWASAKI Z471
/ YAMAHA Z472
|
|
|  ONE
WAY VALVE - UNLIKE SCUPPER VALVES THAT MOUNT
ON THE EXTERIOR OF SKI, ONE WAY VALVE KITS INSTALL "INTO"
THE REAR 1/4 OF PWC END CAPS. THIS KEEPS CONTINUAL WATER PRESSURE
ON THE INSIDE OF THE TUBE KEEPING THE VALVE SHUT WHEN SKI IS
FLOATING.
|
| 800SXR |
|
|
| SJ, KAW750, OCTANE |
|
|
| PRO FINISH KIT |
|
|
|  SCRUPPER
VALVE ASSEMBLY - 24-7 DRAIN VALVE HAS AN ALUMINUM
FLAP THAT DOES NOT BEND OR WARP. FREESTYLE USE ONLY.
|
|
|
|  BILGE
SPONGE - VISCOSE COVERED SPONGE WILL PICK-UP
AND HOLD 32 OZ. OF WATER WITHOUT LEAKING. WITH GROMMET &
HAND CORD.
|
|
|
|
SALT
TERMINATOR - MARINE ENGINE FLUSH & CORROSION PROTECTANT
- DISSOLVES SALT & LEAVES A PROTECTIVE SHEEN, GUARDING
AGAINST FUTURE SALT CORROSION. MIXER AUTOMATICALLY DILUTES THE
CONCENTRATE AND SIPHONS IT THRU A STANDARD GARDEN HOSE. CONNECT
THE HOSE TO YOUR ENGINE'S FLUSH UNIT AND ADD EXTRA YEARS OF
SERVICE. SPRAY ON ALL SURFACES EXPOSED TO SALT WATER OR SALT
AIR. NO SCRUBBING REQUIRED!
|
| SALT TERMINATOR - 10oz.
READY TO USE SPRAY |
SX-10 |
|
| SALT TERMINATOR - QUART
CONCENTRATE |
SX-32 |
|
| SALT TERMINATOR - GALLON
CONCENTRATE |
SX-128 |
|
| SALT TERMINATOR - MIXER
ONLY |
SX-M |
|
